Section 13 Wall Mounting Multiline Terminals; Wall Mounting A Multiline Terminal Using The Base Plate; Adjusting The Hanger Hook - NEC Electra Elite IPK II System Hardware Manual

Electra Elite IPK II
___________________________________________________________________________________
S 13 W
ECTION
You can wall mount a DTH/DTR/IP connection Multiline Terminal (except for
DTR-2D-1 TEL) using the base cover or an optional wall mount unit. A wall mount
unit must be used if adapters are installed on the Multiline Terminal.
13.1
___________________________________________________________________________________
System Hardware Manual
M M
ALL OUNTING ULTILINE

Wall Mounting a Multiline Terminal using the Base Plate

13.1.1

Adjusting the Hanger Hook

1. Remove the hook from the unit.
Figure 8-35 Removing the Hanger Hook on a Multiline Terminal
2. Turn the hook with the tab toward the top.
3. Slide the hook until it glides into position forming the hanger
hook for the handset.
T
ERMINALS
Hanger Hook
Figure 8-36 Sliding the Hanger Hook into Position
Document Revision 3
8 - 29