Fujitsu F2MC-16LX MB90580 Series Hardware Manual page 4

Chapter 12 COMMUNICATION PRESCALER
This section describes the MB90580 series communication prescaler.
Chapter 13 UART
This section describes the function and operation of the MB90580 UART.
Chapter 14 IE BUS
This section describes the functions and operation of the MB90580 series IE Bus.
Chapter 15 8/16-BIT PPG
This section describes the functions and operation of the MB90580 series 8/16-bit PPG.
Chapter 16 16-BIT RELOAD TIMER (WITH EVENT COUNT FUNCTION)
This section describes the functions and operation of the MB90580 series 16-bit reload timer.
Chapter 17 A/D CONVERTERr
This section describes the functions and oeration of the MB90580 series A/D converter.
Chapter 18 D/A CONVERTER
This section describes the functions and oeration of the MB90580 series D/A converter
Chapter 19 PULSE WIDTH COUNTER (PWC) TIMER
This section describes the functions and oeration of the MB90580 series pulse width counter
(PWC) timer.
Chapter 20 CLOCK MONITOR FUNCTION
This section describes the functions of the MB90580 series clock monitor function.
Chapter 21 16-bit I/O Timers
This section describes the functions and operation of the MB90580 series 16-bit I/O timers which
consists of 16-bit free-run timer, 2 output compare regsiters and 4 input capture registers.
Chapter 22 ROM CORRECTION module
This section describes the function and operation of the MB90580 series rom correction module.
Chapter 23 ROM MIRRORING MODULE
This section describes the function of the MB90580 series ROM mirrorIing module.
Appendix A I/O MAP
The appendix A provides I/O maps, and low power mode status transition charts.
Appendix B INSTRUCTION
2 ®
The appendix B describes addressing in the F MC *-16LX series, and provides instruction lists
and instruction maps.
Appendix C PROGRAMMING THE FLASH MEMORY ON THE MB90F584
The appendix C provides programming method of the flash memory on the MB90F584.
iv