Control Linkage & Thumb Latch Replacement (Pistol Grip Hydro); Control Linkage & Thumb Latch Removal - Toro 30284 Service Manual

LINKAGE
18. Install 4 screws (2 on the left, 2 on the right) secur-
ing the control panel cover to the control panel (Fig.
0326).
4
Control Linkage & Thumb Latch
Replacement (Pistol Grip Hydro)
The following procedures are the same for both the right
side and left side handle bars.
4-10
Fig 0326 PICT-1921
Fig 0327 fi g. 10 G004912
Control Linkage & Thumb Latch Removal
1. Turn the engine off and remove the key from the
ignition.
2. Remove the e-clip from the back side of the trunnion
on the lower end of the control rod (Fig. 0328).
Fig 0328
3. Slide the trunnion out of the idler arm (Fig. 0329).
Fig 0329
Floating Deck Mid-Size Service Manual
PICT-0687
PICT-0690