Toro 30284 Service Manual page 51

CHASSIS
10. Install 2 screws and nuts securing the parking brake
switch and switch plate to the handle support (Fig.
0082).
3
11. Plug parking brake switch into the harness con-
nector (Fig. 0083).
3-22
Fig 0082 PICT-0486
Fig 0083 PICT-0485
12. Insert a bolt through the parking brake handle. Install
a thrust bearing onto the bolt and then insert the
bolt/handle/bearing assembly through the handle
support (Fig. 0084).
Fig 0084
13. Install a conical washer onto the bolt (crown facing
the threaded end of the bolt (Fig. 0085).
Fig 0085
Floating Deck Mid-Size Service Manual
PICT-0483
PICT-0507