2. Assemble the bolt, washers, nut and strap into the
slotted opening on the clutch as shown. Before
tightening, move the strap fastener assembly to the
outer-most end of the slot and tighten (Fig. 0015).
Fig 0015
3. Install the 2 cupped washers (crown side facing the
bolt head) and 1 fl at washer onto the clutch bolt (Fig.
0016).
Fig 0016
Floating Deck Mid-Size Service Manual
4. Apply thread locking compound to the clutch bolt
(Fig. 0017).
PICT-0557
5. Apply anti-sieze compound to the engine crankshaft.
Slide the electric clutch onto the crankshaft (Fig.
0018).
PICT-0351a
CHASSIS
Fig 0017
PICT-0352a
Fig 0018
PICT-0354a
3
3-5