ELECTRICAL
3. Plug the harness into the neutral switch (Fig. 1481).
4. With the speed control lever in the neutral position,
check to make sure the safety switch is depressed
with an 1/8" to 1/4" (3 to 6mm) space between the
actuating tab and the safety switch body (Fig. 1482).
A A
A. 1/8" to 1/4" (3 to 6mm) space
9
9-30
Fig 1481
PICT-1823
Fig 1482
PICT-1909
5. To adjust the switch location, loosen the two neutral
bracket screws holding the switch plate to the frame
(Fig. 1483).
Fig 1483
6. Adjust the switch up or down to obtain an 1/8" to 1/4"
(3 to 6 mm) space (Fig. 1484).
A A
Fig 1484
A. 1/8" to 1/4" (3 to 6mm) space
Floating Deck Mid-Size Service Manual
PICT-1911
PICT-1909