Toro 30284 Service Manual page 334

10. Slide the transmission pulley/output shaft assembly
through the frame and into the coupler assembly
(Fig. 1125).
Fig 1125
11. Install 2 bolts and nuts securing the transmission
axle fl ange bearing to the frame (Fig. 1126).
Fig 1126
Floating Deck Mid-Size Service Manual
Note: Relubricate the shafts, if needed (Fig. 1127).
PICT-1554
12. Route the wheel drive belt around the transmission
pulley (Fig. 1128).
PICT-1525
GEAR DRIVE
Fig 1127 PICT-1553a
Fig 1128 PICT-1524
7
7-21