Toro 30284 Service Manual page 232

Note: Make sure flat part of linkage is perpendicular
to the pin of swivel (Fig. 0769).
A
D
90 Degrees
C
C
Fig 0769
A. Hydro control linkage
B. Swivel
12. After adjusting the left hydro control linkage, move
the speed control lever forward and then back to the
neutral position.
13. Make sure the speed control lever is in the neutral
position and the tire does not rotate.
14. Repeat the adjustment if needed.
Floating Deck Mid-Size Service Manual
B
B
fi g. 47 G001735
C. Incorrect position
D. Correct position
Note: If inconsistent neutral occurs, check to be
sure both springs are properly tightened on
the speed control lever under the console,
especially the rear pivot spring. Repeat above
adjustments if necessary (Fig. 0770).
A
C
Fig 0770
A. Speed control lever
B. Rear pivot spring
15. Tighten the front nut on left hydro control linkage
shown in Fig. 0768.
LINKAGE
B
fi g. 49 G001520
C. Spring
4-125
4