Toro 30284 Service Manual page 259

ENGINE
36. Install the trailing shield into the chassis by fi rst
inserting the right side of the trailing shield rod (bent
at a 90º angle) into the hole in the chassis and then
insert the left end of the trailing shield rod (bent at a
45º angle) into the hole in the chassis (Fig. 0854).
5
37. Lower the machine.
38. Roll the PTO drive belt on to the center mower deck
pulley (Fig. 0855).
5-18
Fig 0854 PICT-0273
Fig 0855 PICT-0283
39. Replace the carrier frame cover (Fig. 0856).
Fig 0856
40. Plug the clutch connector into the harness connector
(Fig. 0857).
Fig 0857
Floating Deck Mid-Size Service Manual
PICT-0280
PICT-0547a