Toro 30284 Service Manual page 52

14. Install a nut onto the bolt securing the parking brake
handle to the handle support (Fig. 0086).
Note: Do not over-tighten the nut.
Fig 0086
15. Position the brake linkage rod assembly with the
adjusting yoke positioned up to the parking brake
handle. Insert a clevis pin through the lower yoke
securing it to the parking brake assembly (Fig.
0087).
Fig 0087
Floating Deck Mid-Size Service Manual
16. Install a cotter pin into the clevis pin (Fig. 0088).
PICT-0481
17. Insert a clevis pin through the upper adjusting yoke
securing it to the parking brake handle (Fig. 0089).
PICT-0478
CHASSIS
Fig 0088 PICT-0477
Fig 0089 PICT-0471
3
3-23