Toro 30284 Service Manual page 157

LINKAGE
15. Install one nut onto the control link, threading it down
to the mark (Fig. 0484).
4
16. Install 2 washers and the swivel onto the control link
(Fig. 0485).
4-50
Fig 0484 PICT-0822a
Fig 0485 PICT-0830a
17. Thread the second nut onto the control link. Snug
fi t the nut down to the washer and swivel assembly
(Fig. 0486).
Note: The trunnion and the bolt should be oriented
in opposite directions.
Fig 0486
18. Position the right hand speed control link into the
right side linkage and insert the speed control link
bolt into the upper tab of the drive lever swivel (Fig.
0487).
Fig 0487
Floating Deck Mid-Size Service Manual
PICT-0831a
PICT-0833