Toro 30284 Service Manual page 174

3. Open the locking tab on the front of the Operator
Presence Control (OPC) switch. Unplug the harness
from the OPC (Fig. 0549).
Fig 0549
4. Depress the connector lock with a small fl at screw-
driver (Fig. 0550).
Fig 0550
Floating Deck Mid-Size Service Manual
5. While holding the lock down, draw the wire and
spade terminal out of the connector (Fig. 0551).
PICT-1670a
6. Repeat steps 2 and 3 to remove the second terminal
from the switch.
7. Pull the wire harness from the center tube in the
T-bar (Fig. 0552).
PICT-1689
LINKAGE
Fig 0551 PICT-1692
Fig 0552 PICT-1694a
4
4-67