International Hydro With T-Bar (T2) Controls Cont - Toro 30284 Service Manual

SPECIFICATIONS

International Hydro with T-Bar (T2) Controls cont.

Mower Drive:
Mower Engagement:
Clutch Adjustment:
PTO Drive Belt:
2
PTO Idler:
Deck Drive Belt:
Deck Drive Idler:
Mower Decks:
HOC Range:
Blades:
Spindles:
Spindle Housing:
Bearings:
Construction:
Blade Tip Speed:
Anti-Scalp Rollers:
Skid Plate:
Adjustable Discharge Baffl e:
Rubber Discharge Chute:
Unit Dimensions:
Model No.
30032
*Estimated operating weight
2-16
Engine mounted electric clutch
Periodic air gap adjustment required - .018" + .003" (0.45 + 0.0762mm)
HB section with Aramid (Kevlar) cords and dry clutching envelope
Spring loaded pivot hub with grease fi tting for lubrication / 91cm (36") deck includes
additional fi xed idler.
HA section with Aramid (Kevlar) cords and standard (non-clutching) envelope
Spring loaded / 91cm (36") decks have non-greaseable pivot hub
1" (2.5cm) to 4.50" (11cm) in 1/4" (0.6cm) increments
Two .250" (6.3mm) thick heat treated steel blades
Machined steel 1.00" (25mm) diameter shaft
Ductile cast iron, 9-3/8" (24cm) diameter mounted with six bolts
Sealed ball bearings permanently lubricated with high temperature grease
7 gauge (.179" (4.5mm)) steel welded construction
21,070 ft/m calculated @ 2900 engine rpm
2 front mounted
Standard
Standard
Standard
Width Defl ector
Height Down
46" (117cm) 51.1" (130cm)
Width Defl ector
Raised Length
37.2" (94cm) 78.5" (199cm)
Floating Deck Mid-Size Service Manual
Weight*
667 lbs. (302kg)