Toro 30284 Service Manual page 255

ENGINE
22. Install the square key into the engine crankshaft
keyway (Fig. 0838).
23. Slide the drive pulley onto the engine crankshaft.
Ensure that the long side of the hub is installed
5
toward the engine (Fig. 0839).
5-14
Fig 0838 PICT-0304
Fig 0839 PICT-0303
24. Route the hydro drive belt around the engine crank-
shaft pulley, idler pulley and hydro pulleys (Fig.
0840).
Fig 0840
25. Using a spring removal tool (Toro P/N 92-5771),
install the hydro drive idler spring (Fig. 0841).
Fig 0841
Floating Deck Mid-Size Service Manual
PICT-0348a
PICT-0349