Toro 30284 Service Manual page 167

LINKAGE
11. Remove the hairpin cotter from the clevis pin se-
curing the neutral adjustment stud yoke to the drive
lever swivel (Fig. 0523).
4
12. Remove the clevis pin (Fig. 0524).
4-60
Fig 0523 PICT-0914
Fig 0524 PICT-0915
13. Loosen the 2 set screws securing the drive lever
swivel to the hydro pump shaft (Fig. 0525).
Note: There is an access hole located in the frame
below the drive lever swivel.
Fig 0525
14. Remove the drive lever swivel from the hydro pump
shaft (Fig. 0526).
Fig 0526
Floating Deck Mid-Size Service Manual
PICT-0916
PICT-0917