Toro 30284 Service Manual page 300

9. Advance the forcing screw through the hub puller.
Tighten the lug nuts down evenly until the hub pops
off the wheel motor shaft (Fig. 1008).
Fig 1008
10. Remove the hub puller from the hub.
11. Remove the key from the keyway (Fig. 1009).
Fig 1009
Floating Deck Mid-Size Service Manual
HYDROSTATIC DRIVE SYSTEM
12. Thoroughly clean the area around the hydraulic
13. Mark the hoses and corresponding wheel motor
PICT-0447
14. Position a drain pain under the wheel motor.
15. Disconnect both hydraulic hoses from the wheel
PICT-0448
fi ttings to prevent debris from entering the system.
fi tting ports so the hoses are reconnected back in
their original locations (Fig. 1010).
Fig 1010
motor (Fig. 1011).
Fig 1011
PICT-0451
6
PICT-0453
6-21