ENGINE
13. Pull the outer housing of the choke cable until the
inner wire has almost no slack and tighten the cable
clamp bolt (Fig. 0830).
14. Move the choke control knob to the "choke" position
5
(Fig. 0831).
5-12
Fig 0830
PICT-0334
Fig 0831
PICT-0336
15. Ensure the carburetor choke plate is fully closed
(Fig. 0832).
Fig 0832
16. Make sure the choke plate turns from the fully closed
position to the fully open position when actuating the
choke control knob.
17. Hook the z-bend of the throttle cable to the throttle
control lever and loosely clamp the outer housing of
the throttle cable into the cable clamp (Fig. 0833).
Fig 0833
Floating Deck Mid-Size Service Manual
PICT-0335
PICT-0338