Toro 30284 Service Manual page 139

LINKAGE
3. Install a jam nut onto the threads so that there is
approximately 1/4" (6.4mm) space between the jam
nut and the machined nut on the neutral stud (Fig.
0413).
4
4. Thread the yoke onto the neural adjustment stud so
that the end of the stud is fl ush with the opening of
the yoke (Fig. 0414).
4-32
Fig 0413 PICT-0998a
Fig 0414 PICT-1000a
5. Snug the jam nut against the yoke (Fig. 0415).
Fig 0415
6. Slide the washer onto the end of the neutral adjust-
ment stud opposite the yoke (Fig. 0416).
Fig 0416
Floating Deck Mid-Size Service Manual
PICT-1002a
PICT-1003a