LINKAGE
31. Position the speed control handle (Fig. 0500).
4
32. Loosely install the upper and lower bolts and nuts
(Fig. 0501).
4-54
Fig 0500
PICT-0857a
Fig 0501
PICT-0864
33. Loosely install the middle bolt, spring and nut,
making sure the bolt goes through the washer in
between the plates (Fig. 0502).
Fig 0502
Tighten the middle nut until approximately 3 threads
stick out past the nut (Fig. 0503).
Note: Do not collapse the spring.
Fig 0503
Floating Deck Mid-Size Service Manual
PICT-0868
PICT-0872a