Toro 30284 Service Manual page 31

CHASSIS
7. Remove the carrier frame cover (Fig. 0004).
3
8. Roll the PTO drive belt off the center pulley on the
mower deck (Fig. 0005).
3-2
Fig 0004 PICT-0546
Fig 0005 PICT-0281
9. Raise the machine so that the underside of the
chassis can be accessed.
10. Remove the trailing shield from the chassis by fi rst
removing the left end of the shield rod (bent at a 45
degree angle) from the hole in the frame and then
remove the right side of the shield rod (bent at 90
degree angle) from the right side of the frame (Fig.
0006).
Fig 0006
11. Remove the PTO idler arm spring from the spring
post (Fig. 0007).
Fig 0007
Floating Deck Mid-Size Service Manual
PICT-0273
PICT-0291a