Toro 30284 Service Manual page 407

MOWER DECKS
3. With the machine on level surface, position one
blade front-to-rear. Measure at location A from a
level surface to the cutting edge of the blade tip (Fig.
1391 and for 36" mower decks use Fig. 1392).
4. The measurement should be 4" (101.6mm).
5. If it does not measure correctly:
A. Adjust the rear tire pressure.
B. Adjust the caster fork spacers.
C. Adjust the front mower deck support pins.
6. Check the carrier frame front-to-rear pitch. Refer to
"Checking the Mower Deck Front-to-Rear Pitch" on
page 8-65.
A
This illustration shows a 40", 48" and 52" mower deck.
B. Measure from a level
surface
8
8-68
B
A
A
C
Fig 1391 fi g. 87 G000975
C. Measure blade at
point A
A
Fig 1392
This illustration shows a 36" mower deck.
Floating Deck Mid-Size Service Manual
A
fi g. 88 G000296