8. Align the carrier frame and engine deck to meet the
11/16" + 1/4" (17.46mm + 6.35mm) measurement at
the front carrier frame cross brace (Fig. 0199).
Fig 0199
9. Tighten the carrier frame mounting bolts on both
sides of the machine. Torque to 70 + 10 ft-lbs. (94.9
+ 13.6 Nm) (Fig. 0200).
Fig 0200
Floating Deck Mid-Size Service Manual
10. Remove the straight edge and 2x2 piece of stock.
11. Install the carrier frame cover (Fig. 0201).
PICT-1345
Castor Wheel Replacement
The following procedures are the same for both the left
and right castor assemblies.
Castor Wheel Removal
1. Remove the locking pin from the castor fork assem-
bly (Fig. 0202).
PICT-1303
CHASSIS
Fig 0201
PICT-1038
Fig 0202
PICT-1316
3
3-53