Toro 30284 Service Manual page 227

LINKAGE
12. Pull on the outer cable housing until the inner wire
has almost no slack. Tighten the cable clamp bolt
(Fig. 0759).
4
13. Install a cable tie securing the throttle cable to the
left handle bar. Cut off excess (Fig. 0760).
4-120
Fig 0759 PICT-0682
Fig 0760 PICT-0683a
14. Install a cable tie securing the throttle cable to the
choke cable above the left tire. Cut off excess (Fig.
0761).
Fig 0761
15. Tighten the R-clamp screw securing the throttle
cable to the frame (Fig. 0762).
Fig 0762
16. Move the throttle lever to the slow position. Make
sure that the carburetor throttle valve moves
smoothly to the closed position.
Floating Deck Mid-Size Service Manual
PICT-0684a
PICT-0661