Toro 30284 Service Manual page 307

HYDROSTATIC DRIVE SYSTEM
2. Tighten the locking nuts while maintaining the orient-
ation of the fi ttings (Fig. 1035).
3. Position the reservoir assembly onto the mounting
fl ange. Install 2 bolts and nuts securing the reservoir
(Fig. 1036).
6
6-28
Fig 1035 PICT-0396a
Fig 1036 PICT-0400
4. Install the two hydraulic hoses onto the reservoir
fi ttings (Fig. 1037).
Fig 1037
5. Fill the reservoir with hydraulic fl uid (15w-50 syn-
thetic engine oil) as specifi ed. Note that there are fi ll
level lines inside of the reservoir (Fig. 1038).
Fig 1038
6. Replace reservoir cap.
7. Bleed the hydraulic system. See "Bleeding the Hyd-
raulic System" on page 6-32.
Floating Deck Mid-Size Service Manual
PICT-0436a
PICT-0382