31. Route the deck drive belt around the clutch (Fig.
0922).
Fig 0922
32. Install the idler arm spring to the spring post (Fig.
0923).
Fig 0923
Floating Deck Mid-Size Service Manual
33. Install the trailing shield into the frame by fi rst insert-
ing the right side of the trailing shield rod (bent at
a 90 degree angle) into the hole in the chassis and
then insert the left end of the trailing shield rod (bent
at a 45 degree angle) into the hole in the chassis
(Fig. 0924).
PICT-1365a
34. Lower the machine.
35. Roll the deck drive belt onto the fi xed (center) mower
deck pulley (Fig. 0925).
PICT-1364
ENGINE
Fig 0924
PICT-1362
Fig 0925
PICT-1361
5
5-35