Toro 30284 Service Manual page 211

LINKAGE
45. Route the harness up the left side of the frame and
into the control panel.
46. Install a bolt and nut securing each of the relay
harness connector blocks to the control panel (Fig.
0696).
4
47. Plug the kill relay into the harness connector (Fig.
0697).
4-104
Fig 0696 PICT-2036
Fig 0697 PICT-2035
48. Plug the latching relay into the harness connector
(Fig. 0698).
Fig 0698
49. Install the hour meter into the control panel (Fig.
0699).
Fig 0699
Floating Deck Mid-Size Service Manual
PICT-2041a
PICT-2039a