Toro 30284 Service Manual page 285

HYDROSTATIC DRIVE SYSTEM
8. Install the hydro idler spring to the spring post (Fig.
0952).
9. Route the PTO drive belt around the clutch (Fig.
0953).
6
6-6
Fig 0952 PICT-0565
Fig 0953 PICT-0364a
10. Install the PTO idler spring to the spring post on the
frame (Fig. 0954).
Fig 0954
11. Install the trailing shield into the frame by fi rst insert-
ing the right side of the trailing shield rod (bent at
a 90 degree angle) into the hole in the right side of
the frame and then insert the left end of the trailing
shield rod (bent at a 45 degree angle) into the hole
in the left side of the frame (Fig. 0955).
Fig 0955
Floating Deck Mid-Size Service Manual
PICT-0291a
PICT-0273