Toro 30284 Service Manual page 39

CHASSIS
4. Raise the machine so that the underside of the
chassis can be accessed.
5. Remove the PTO idler arm spring from the spring
post and the idler arm (Fig. 0035).
3
6. Remove the bolt, nut, washers and idler tube secur-
ing the PTO idler arm assembly to the frame (Fig.
0036).
3-10
Fig 0035 PICT-0291a
Fig 0036 IMG-7690
7. Remove the PTO idler arm assembly from the frame
(Fig. 0037).
Fig 0037
8. Press out the bearing sleeves from the idler arm
(Fig. 0038).
Fig 0038
Floating Deck Mid-Size Service Manual
PICT-0604a
PICT-0605