Toro 30284 Service Manual page 310

17. After all necessary repairs have been made, recon-
nect the hydraulic hoses to the wheel motor fi ttings.
18. Slide the wheel and tire assembly onto the hub and
snug fi t the 4 lug nuts on the wheel hub studs (Fig.
1045).
Fig 1045
19. Lower the machine so the rear tires are resting on
the ground.
20. Apply the parking brake.
21. Tighten and torque the 4 lug nuts to 85 + 8 ft-lbs.
(115 + 11 Nm) (Fig. 1046).
Fig 1046
Floating Deck Mid-Size Service Manual
HYDROSTATIC DRIVE SYSTEM
22. Fill the reservoir with hydraulic fl uid (15w-50 syn-
PICT-0380
23. Release the parking brake.
24. Bleed the hydraulic system. See "Bleeding the
PICT-0381
thetic engine oil) as specifi ed. Note that there are fi ll
level lines inside of the reservoir (Fig. 1047).
Fig 1047
Hydraulic System" on page 6-32.
PICT-0382
6
6-31