Toro 30284 Service Manual page 195

LINKAGE
32. Remove the washer from the upper end of the
control linkage rod (Fig. 0632).
4
33. Remove the upper end of the control rod from the
tab on the control handle (Fig. 0633).
4-88
Fig 0632 PICT-2065
Fig 0633 PICT-2066
34. Repeat steps 31 - 33 to remove the control rod from
the opposite motion control lever assembly.
35. Remove the spring from the right hand control lever
assembly (Fig. 0634).
Fig 0634
36. Remove the 2 screws securing the OPC switch to
the control lever assembly (Fig. 0635).
Fig 0635
Floating Deck Mid-Size Service Manual
PICT-2071
PICT-2073a