Toro 30284 Service Manual page 465

ELECTRICAL
3. The distance between the face of the switch and the
end of the hex head screw should be .07" + .02" (1.8
+ .5mm) (Fig. 1583).
A. .07" + .02" (1.8 + .5mm)
4. Install a cable tie securing the switch wires to the
frame (Fig. 1584).
9
9-58
A A
Fig 1583 PICT-1943
Fig 1584 PICT-1945
5. Plug the harness into the proximity neutral switch
connector (Fig. 1585).
Fig 1585
6. Connect the negative battery cable to the battery.
Floating Deck Mid-Size Service Manual
PICT-1938