Hydro Idler Installation - Toro 30284 Service Manual

7. Remove the bolt, washer, pulley, and spacer from
the idler lever (Fig. 0964).
Fig 0964
8. Inspect the bearing and bushings in the pulley
and idler lever. If worn or damaged they must be
replaced.
Hydro Idler Assembly (Fig. 0965).
A
B
C
Fig 0965
A. Bolt
B. Washer
C. Pulley
Floating Deck Mid-Size Service Manual
HYDROSTATIC DRIVE SYSTEM
PICT-0583
D
E F
PICT-0590a
D. Spacer
E. Idler lever
F. Nut

Hydro Idler Installation

1. Slide the washer onto the bolt. Insert the bolt
through the fl ush face side of the pulley (Fig. 0966).
Fig 0966
2. Slide the spacer onto the bolt (Fig. 0967).
Fig 0967
PICT-0593
6
PICT-0594
6-9