Traction Drive Belt Installation - Toro 30284 Service Manual

GEAR DRIVE
5. Unhook the gear drive idler spring from the tab on
the frame (Fig. 1052).
6. Remove the traction drive belt from around the
pulleys and remove it from the machine (Fig. 1053).
7
7-2
Fig 1052 PICT-1443
Fig 1053 PICT-1447

Traction Drive Belt Installation

Note: The trailing shield has been removed for
photo purposes.
1. Route the traction drive belt around the pulleys (Fig.
1054).
H
G
Fig 1054
A. Clutch retainer
B. Transmission belt
C. Tension spring
D. Driven pulley
2. Hook the drive belt idler spring to the tab on the
frame (Fig. 1055).
Fig 1055
Floating Deck Mid-Size Service Manual
A
B
C
D
E
F
fi g. 47 G000264
E. Pivot bolt
F. Idler pulley
G. Engine deck
H. Clutch wire connector
PICT-1443