Toro 30284 Service Manual page 271

ENGINE
10. Pull the outer housing of the choke cable until the
inner wire has almost no slack and tighten the cable
clamp (Fig. 0902).
11. Move the choke control knob to the "choke" position
5
(Fig. 0903).
5-30
Fig 0902 PICT-1402
Fig 0903 PICT-1403
12. Ensure the carburetor choke plate is fully closed
(Fig. 0904).
Fig 0904
13. Make sure the choke plate turns from the fully closed
position to the fully open position when actuating the
choke control knob.
14. Hook the z-bend of the throttle cable to the throttle
control lever and loosely clamp the outer housing of
the throttle cable into the cable clamp (Fig. 0905).
Fig 0905
Floating Deck Mid-Size Service Manual
PICT-1401
PICT-1383