Toro 30284 Service Manual page 147

LINKAGE
3. Remove the cotter pin from the lower end of the
speed control rod (Fig. 0444).
4
4. Remove the washer and speed control rod assembly
from the tab on the speed control crank assembly
and remove it from the machine (Fig. 0445).
4-40
Fig 0444 PICT-0747
Fig 0445 PICT-0750
5. Remove the nut from the pivoting sprung bolt (Fig.
0446).
Fig 0446
6. Remove the middle bolt and spring assembly secur-
ing the speed control handle to the control panel
(Fig. 0447).
Fig 0447
Floating Deck Mid-Size Service Manual
PICT-0751
PICT-0754