Toro 30284 Service Manual page 223

LINKAGE
8. T2 Models: Remove the cable tie securing the
harness to the throttle cable (Fig. 0743).
4
9. Cut the cable ties at the following locations (Fig.
0744).
A. Throttle/neutral proximity switch wire/frame
B. Throttle/frame
4-116
Fig 0743 PICT-2043
B B
A A
Fig 0744 PICT-2051
10. Remove the 2 screws and nuts securing the throttle
handle assembly to the left handle (Fig. 0745).
Fig 0745
11. Remove the throttle handle cable and gasket as-
sembly out through the control panel (Fig. 0746).
Fig 0746
Floating Deck Mid-Size Service Manual
PICT-0667
PICT-0670a