Wheel Drive Belt & Wheel Hub Removal
1. Turn the engine off and remove the key from the
ignition.
2. Raise the machine so the rear tire is off the ground.
3. Remove the 3 lower idler support mounting bolts
(Fig. 0091).
Fig 0091
4. Loosen the idler support bracket pivot bolt (Fig.
0092).
Fig 0092
Floating Deck Mid-Size Service Manual
5. Rotate the idler support bracket so that it is out of
the way of the transmission pulley (Fig. 0093).
6. Remove the wheel drive belt from the transmission
pulley and remove it from around the drive wheel
(Fig. 0094).
PICT-1519
PICT-1520
CHASSIS
Fig 0093
PICT-1521
Fig 0094
PICT-1577
3
3-25