13. Install the key into the transmission driveshaft key-
way (Fig. 0099).
Fig 0099
14. Position the drive pulley onto the transmission drive
shaft so that the pulley hub faces toward the ma-
chine. The transmission driveshaft should be fl ush
with the outside fl ange of the pulley (Fig. 0100).
Fig 0100
Floating Deck Mid-Size Service Manual
15. Apply thread locking compound to the drive pulley
set screw (Fig. 0101).
PICT-1583
16. Install the set screw into the drive pulley (Fig. 0102).
PICT-1582
CHASSIS
Fig 0101
PICT-1587a
Fig 0102
PICT-1580
3
3-27