CHASSIS
PTO Idler Installation
1. Install the grease fi tting into the idler arm (Fig. 0043).
3
2. Press the bearing sleeves into the idler arm pivot
(Fig. 0044).
3-12
Fig 0043
PICT-0613
Fig 0044
PICT-0619
3. Position the pulley onto the idler arm (Fig. 0045).
Fig 0045
4. Slide the Belleville washer (crown toward the bolt
head) and fl at washer onto the bolt. Install the bolt
and washers through the pulley and into the idler
arm (Fig. 0046).
Fig 0046
Floating Deck Mid-Size Service Manual
PICT-0610
PICT-0620