Toro 30284 Service Manual page 55

CHASSIS
7. Inspect the pulleys for wear and damage. Replace
as necessary. If pulley replacement is required,
continue on. For belt replacement only, go to "Wheel
Drive Belt and Wheel Hub Installation" step 17, on
page 3-34.
8. Loosen the set screw securing the drive pulley to the
transmission (Fig. 0095).
3
9. Slide the drive pulley off the transmission drive shaft
(Fig. 0096).
3-26
Fig 0095 PICT-1580
Fig 0096 PICT-1582
10. Remove the key from the drive pulley shaft keyway
(Fig. 0097).
Fig 0097
11. Inspect the key and replace it if it is worn or damage.
12. Apply anti-seize to the transmission drive shaft (Fig.
0098).
Fig 0098
Floating Deck Mid-Size Service Manual
PICT-1583
PICT-1586