Table of Contents
Advertisement
Wait State Control: As the clock frequency increases, it becomes impossible to complete all
states in one cycle as in basic access. Therefore, provision is made for state extension by using the
setting bits in WCR2 and MCR. The timing with state extension using these settings is shown in
figure 13.16. Additional Tpc cycles (cycles used to secure the 5$6 precharge time) can be
inserted by means of the TPC bit in MCR, giving from 1 to 7 cycles. The number of cycles from
5$6 assertion to &$6 assertion can be set to between 2 and 5 by inserting Trw cycles by means of
the RCD bit in MCR. Also, the number of cycles from &$6 assertion to the end of the access can
be varied between 1 and 16 according to the setting of A2W2 to A2W0 or A3W2 to A3W0 in
WCR2.
CKIO
A25–A0
RD/
D63
–
D0
(read)
–
D63
D0
(write)
DACKn
(SA: IO ← memory)
DACKn
(SA: IO → memory)
Rev. 4.0, 04/00, page 338 of 850
Tr1
Tr2
Trw
Row
Figure 13.16 DRAM Wait State Timing
Tc1
Tcw
Tc2
Column
Tpc
Tpc
Advertisement
Table of Contents
