Table of Contents
Advertisement
Bits 15 and 14—Destination Address Mode 1 and 0 (DM1, DM0): These bits specify
incrementing/decrementing of the DMA transfer destination address. The specification of these
bits is ignored when data is transferred from external memory to an external device in single
address mode. For channel 0, in DDT mode, the settings are fixed at DM1 = 0 and DM0 = 1.
Bit 15: DM1
Bit 14: DM0
0
0
1
1
0
1
Bits 13 and 12—Source Address Mode 1 and 0 (SM1, SM0): These bits specify
incrementing/decrementing of the DMA transfer source address. The specification of these bits is
ignored when data is transferred from an external device to external memory in single address
mode. For channel 0, in DDT mode the settings are fixed at SM1 = 0 and SM0 = 1.
Bit 13: SM1
Bit 12: SM0
0
0
1
1
0
1
Rev. 4.0, 04/00, page 432 of 850
Description
Destination address fixed
Destination address incremented (+1 in 8-bit transfer, +2 in 16-
bit transfer, +4 in 32-bit transfer, +8 in 64-bit transfer, +32 in 32-
byte burst transfer)
Destination address decremented (–1 in 8-bit transfer, –2 in 16-
bit transfer, –4 in 32-bit transfer, –8 in 64-bit transfer, –32 in 32-
byte burst transfer)
Setting prohibited
Description
Source address fixed
Source address incremented (+1 in 8-bit transfer, +2 in 16-bit
transfer, +4 in 32-bit transfer, +8 in 64-bit transfer, +32 in 32-
byte burst transfer)
Source address decremented (–1 in 8-bit transfer, –2 in 16-bit
transfer, –4 in 32-bit transfer, –8 in 64-bit transfer, –32 in 32-
byte burst transfer)
Setting prohibited
(Initial value)
(Initial value)
Advertisement
Table of Contents
