Binary Input - Toshiba GR-200 Series Instruction Manual

Binary input

(ii)
All binary input circuits (BIs) are user-configurable; the user can set common programmable
logic (CPL) for each binary input circuit. (For more information of CPL, see Chapter
description: Binary IO module: Binary input circuit
The user can activate or turn off the above timers and switches using the setting function.
To configure the binary input circuits, the user should follow the procedure in steps ((ii)-1 and
(ii)-2)
Selection of binary input circuit: Figure 12.6-4 illustrates the selection of a
binary input circuit on a BIO module. Move the cursor by pressing ▲ and ▼.
Then, press ►to go to the next hierarchy.
Binary Input
10:48
Slot#1
_Slot#3
Slot#4
Figure 12.6-4 Selection of slot and binary input circuit (Sample)
CPL setting: Figure 12.6-5 is "Common" setting. The user can set a threshold
level and the number of comparisons feature for contact chatter for all binary
input circuits.
Figure 12.6-5 Common screen (Sample)
Figure 12.6-6 shows the CPL setting for binary input circuit (BI1). The timer and
the inverse switch can be activated when On is set for setting [BI1_CPL]. Press
ENTER to complete the setting of a switch or parameter.
→p. 537)
Slot#3
2/3 10:48
> _Common
[►]
>
>
Common
10:48 1/2
Thres_Level +
Low
Cmp_Num +
4
- 888 -
6F2T0200 (0.15)
1/8
>
BI1 >
BI2 >
BI3 >
BI4 >
BI5 >
Technical
GRE200 (1,2)