Toshiba GR-200 Series Instruction Manual page 607

Overview of PLC function
PLC (Programmable Logic Controller) software is used for configuring the Inputs/outputs
(I/Os), alarms, indications, recording and others. PLC logic consist of "timers", "flip-flops", and
logic gates "AND, OR, XOR, NOT". The user can configure PLC-logic using the PLC editor
(MULTIPROG®), which should be installed in the user's PC. Figure 7.1-1 shows the screen for
the PLC editor.
Figure 7.1-1 PC screen of MULTIPROG®
Note: To handle the PLC editor on the PC, the user shall purchase a software license
(EP-261; see
information of PLC and MULTIPROG®, see separate manual
Programmable Logic Controller and PLC editor (6F2S1904))
PLC data error
The Automatic supervision reports the error information when an error occurs in PLC logic.
The error information† is shown in the Monitoring sub-menu on the IED screen. See Chapter
Automatic supervision: Supervision tasks: Supervision of data in PLC function
Figure 7.2-1 Error code at 1
Appendix: Ordering
) from Toshiba sales representative. For more
PLC data error
10:48
[Minor error]
[00000006]
[00000000]
[00000000]
st st
row and 1
- 588 -
1/1
[00000000]
[00000000]
[00000000]
PLC error code
column on Monitoring sub-menu
6F2T0200 (0.15)
Basic manual:
.
(→p. ).
703
GRE200 (1,2)