Toshiba GR-200 Series Instruction Manual page 863

Protocol selection
11.5.7
Figure 11.5-13 shows the setting menu for the Communication. The IED can run with the
IEC60870-5-103 communication after the user sets IEC103 for the setting [Slave Protocol].
Restarting the IED is required after that (i.e., you have to reset the IED by power off-on).
Communication
10:48 1/3
LAN
USBCOM
SLAVE PROTOCOL
Figure 11.5-13 Slave protection for the IEC103 protocol (on IED setting menu)
Note: This sample menu illustrates how to select the IEC103, so that we discuss neither
the inclusion of IEC61850, DNP3.0, and Modbus nor the selection of those
protocols here. See Figure 11.1-1 to check the inclusion of the protocols in the IED.
SLAVE PROTOCOL
10:48
Slave Protocol
>
IEC103
>
>
- 844 -
SLAVE PROTOCOL
1/1 10:48
+
IEC61850†
IEC103
DNP3.0†
Modbus†
6F2T0200 (0.15)
1/4
GRE200 (1,2)