Download Print this page

Toshiba GR-200 Series Instruction Manual page 604

Multi functional protection ied
Hide thumbs Also See for GR-200 Series:

Advertisement

date and time is treated in the UTC. Notice that the time in the UTC is converted
for the local time when the recording time is displayed on the PC. For the clock
operation if the user selects neither the UTC, the time zone or the daylight saving
time (the summer time), displaying incorrect time may result in between the IED
and the PC. For more information about the clock and time, see Chapter
description: Clock function
Generic configuration tools
Setting (general setting for the relay and controlling functions)
(i)
The user can make the IED settings on the GR-TIEMS; the IED settings are transferred into
the IED by the connection between the IED and the GR-TIEMS.
Setting I/O
(ii)
The user can see and make the setting with regard to binary input/output circuits (BIO), LEDs
using the setting I/O function. For more information about the BIO, and the LED, see Chapter
Technical description
Setting event list
(iii)
The user can set Invent recorder function. See Chapter
(→p. 620).
Interlock configurator
(iv)
The user can program conditions for executing to control the primary equipment using the
interlock (ILK) configurator. For example, controlling a circuit breaker (open and closing) is
significant; note not induce mal-operations caused by improper conditions; otherwise a severe
fault/blackout results in. The ILK configurator can provide the user to program conditions
concerning the status of the power system. For more information of the ILK, See chapter
Control and monitoring application: Software interlock function
IEC 61850 configuration tool
The user can configure conversion data for the IEC61850 communication†, provided the IED
exchanges the data with the SAS. The user also configures a logical device, a logical node,
Goose publish information, and Goose subscribe information (→p. 751).
Modbus configuration tool
The user can set the Modbus data in the IED with GR-TIMES. See Chapter
protocol: Modbus communication
†Note: It is possible when the IED has a Modbus Slave communication feature. This tool
does not appear on the GR-TIMES screen, when the IED does not have that
. (→p.565)
(→p. 505).
(→p. 795)†.
- 585 -
6F2T0200 (0.15)
Recording function: Event recorder
(→p. 490).
Communication
GRE200 (1,2)
Technical

Advertisement

loading

This manual is also suitable for:

Gre200-1Gre200-2