Toshiba GR-200 Series Instruction Manual page 870

Detail of the function
(ii)
The forcibly signal control function has 32 controllable signals: "OUT_FSC01" to
"OUT_FSC32".
Both "Signal generation" and "signal non-generation" can be controlled. The control procedure
is same as the procedure for binary input test and binary output test. It can be described in
User interface: Test-submenu: F. Signal Control screen
Chapter
Furthermore, "SIMBIT GENERATION" signal generation is also prepared during the test. It
can be used for an alarm during testing, if necessary.
Settings
(iii)
Setting items
FSC01-SET Normal / Off / On
FSC02-SET Normal / Off / On
FSC03-SET Normal / Off / On
FSC32-SET Normal / Off / On
Signals (DataID)
(iv)
◆ Signal monitoring points
ForcSigCont (Function ID: 4C3081)
Element ID Name
3100001198 FSC OP
8000001C80 SIMBIT GENERATION
8000001BB0 IN_FSC01
8000001BB1 IN_FSC02
8000001BB2 IN_FSC03
8000001BCE IN_FSC31
8000001BCF IN_FSC32
8000001C60 OUT_FSC01
8000001C61 OUT_FSC02
8000001C62 OUT_FSC03
OUT_FSC31
8000001C7E
OUT_FSC32
8000001C7F
Table 11.8-1 Setting for forcibly control
Range Unit
-
-
-
-
Description
Signal forced operate start
simulation bit generation
Forcibly Signal Control function input signal 01
Forcibly Signal Control function input signal 02
Forcibly Signal Control function input signal 03
Forcibly Signal Control function input signal 31
Forcibly Signal Control function input signal 32
Forcibly Signal Control function output signal 01
Forcibly Signal Control function output signal 02
Forcibly Signal Control function output signal 03
Forcibly Signal Control function output signal 31
Forcibly Signal Control function output signal 32
- 851 -
(see Chap 12.8(ii)-5).
Contents
Forcibly control style for FSC01 signal
Forcibly control style for FSC02 signal
Forcibly control style for FSC03 signal
|
|
|
Forcibly control style for FSC32 signal
|
|
|
|
|
|
6F2T0200 (0.15)
GRE200 (1,2)