Toshiba GR-200 Series Instruction Manual page 394

Figure 3.4-11 LN editing for SBO mode (for example)
Defining DIR mode
Figure 3.4-12 exemplifies the LEDR logic node saved as LLN0. In the DIR mode, the following
three items should be selected using GR-TIEMS:
Figure 3.4-12 LN editing for DIR mode (for example)
Mapping output data
(ii)
The user should group the OPTR signals with regard to GOOSE and Report; the user should
map them for IEC61850 communication using GR-TIEMS. Figure 3.4-13 illustrates how to
map a signal for IEC61850 communication; it indicates that the signals for the LEDR function
SBOw
✓
Oper
✓
Cancel
✓
Origin
✓
stSeld
✓
sboClass† (choice "operate-once")
✓
ctlmodel (choice "SBOes or SBOns")
✓
†"sboClass" can be found by scrolling down.
Oper
✓
origin
✓
ctlmodel (choice "DOes or DOns" )
✓
- 375 -
6F2T0200 (0.15)
GRE200 (1,2)