Toshiba GR-200 Series Instruction Manual page 482

Table 4.1-19 PLC monitoring points (Output signals for response)
Signal Number Signal Name
512001 8003011E93 DPOS01_EX_CMP
512001 8003021E93 DPOS02_EX_CMP
512001 8003031E93 DPOS03_EX_CMP
... ...
512001 8003481E93 DPOS72_EX_CMP
512001 8603011E91 DPOS01_EX_FFL
512001 8603021E91 DPOS02_EX_FFL
512001 8603031E91 DPOS03_EX_FFL
.... ....
512001 8603481E91 DPOS72_EX_FFL
Setting names
(ix)
Note: The "xx" of "DPOSxx" represents the DPOS function number. (e.g., if the DPOS03
is considered, the "xx" is equal to "03". The suffix "xx" can be represented by "01"
to "72".)
Setting Name Description
DPOSxx-PLSM Methods of command output(DPOS1-72)
DPOSxx-CPW Duration of command output(DPOS1-72)
DPOSxx-RST Detection time for terminating control (DPOS1-72)
DPOSxx-LGCTRCON Logic selector for operate condition (DPOS01-72)
DPOSxx-LGCFEXOT Logic selector for command output (DPOS01-72)
DPOSxx-CTREN Activate control function of DPOS01-72
DPOSxx-LGEXFFCT Logic selector for operate condition (DPOS01-72)
Description
DPOS01 completed control
DPOS02 completed control
DPOS03 completed control
...
DPOS72 completed control
DPOS01 failed control
DPOS02 failed control
DPOS03 failed control
....
DPOS72 failed control
Table 4.1-20 Setting of Operate in DPOSxx
- 463 -
6F2T0200 (0.15)
Default Setting item or value
Fix Fix/Var/Latch
1.0[sec] 0.1~50.0[sec]
30.0[sec] 0.1~100.0[sec]
Fixedlogic Fixedlogic/PLC
Fixedlogic Fixedlogic/PLC
On Off / On
Fixedlogic Fixedlogic / PLC
GRE200 (1,2)