Toshiba GR-200 Series Instruction Manual page 764

IP setting example [RedundantMode]=PRP or HSR
(vi)
When PRP or HSR is set for the setting [RedundantMode], the user can apply single IP address
in the IED. The table below shows that both Port A and B have the same IP address.
Table 11.2-2 Default IP address for PRP/HSR operation
Protocol IEC61850(GOOSE)
IP address at
Port A†
192.168.1.11
IP address at
Port B†
†Note: Address '192.168.1.11' is set as default. Either port A or B is allowed to operate.
SNTP
192.168.1.11
- 745 -
6F2T0200 (0.15)
GR-TIEMS® /
MULTIPLOG®
192.168.1.11
GRE200 (1,2)